The Little Black box
A Bluetooth controlled cable actuator for cameras with cable triggers
Controller app Available on Android and IOS (Well it will be when the hardware is released :) )
COMING SOON
Actuate your cable release camera from your phone
Delay for as long as you want
long exposures made easy
and a couple other tricks :)
If you are a film photographer that would like to put down the air bulb for doing selfies, or be able to set up a shot that requires a delay or really long exposure this may just be the tool for you.
If you want a mass produced cable trigger with little to no configuration and looks like it was built in a factory without the flaws of something made in some random photographers basement then I suggest checking out the other option on the market. But it you want something that can be custom tuned to your hardware and workflow then stick around :)
Delay/ exposure times/ Trigger with the volume buttons on your phone or one of those Bluetooth camera triggers that connect to your phone.
Only 230G on my wife’s kitchen scale.
110 X 90 X 56 mm it will fit in your camera bag without taking up much space.
Uses the Cheap “Fotasy” cables so you might even have a cable for this in your bag already.
20mm actuation stroke available but most cameras don’t need that so you can configure it to match what your camera needs.
App Controlled with multiple configuration tools to make it work with the Shutter and setup you have.
Rechargeable Battery Powered (USB C Rechargeable) (on standby the battery lasts approximately 8 hours and over 1000 triggers)
In app calibration to ensure that the exposures are accurate with your configuration (Longer cables, longer actuation on the shutter, stiff shutter actuator, bends in the cable etc all impact the accuracy and the calibration tool helps overcome these).
¼ 20 mount.
self contained - Technically you can store your cable inside the box.
— App is currently in Beta Testing on Android and IOS - If you get it early you will get free access to the Beta and then a code to the full release when it is out of Beta testing
OTA Firmware updates and custom configurations available - (custom drive pressure for old stiff rolling shutters, Short exposure options for those shutters that don’t have times available [1/30 or 1/60 possible but it will have a lot to do with your hardware], Extended battery, and when my lidar camera trigger is released it will also activate this unit for those crazy enough to want to operate a film trap camera). Just reach out and we can configure it for what you need.
All units come with
4 Geared Drive rods (in case you break the original or if you need more preload for calibration)
a 2mm and 2.5mm spacer and M8 nut to connect the cable to the trigger